The Accurate Reloading Forums
9.3X64 Brenneke

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/3221043/m/7451019521

02 February 2010, 18:56
Dave Bush
9.3X64 Brenneke
Anyone know of a source for brass for the 9.3X64?


Dave
DRSS
Chapuis 9.3X74
Chapuis "Jungle" .375 FL
Krieghoff 500/.416 NE
Krieghoff 500 NE

"Git as close as y can laddie an then git ten yards closer"

"If the biggest, baddest animals on the planet are on the menu, and you'd rather pay a taxidermist than a mortician, consider the 500 NE as the last word in life insurance." Hornady Handbook of Cartridge Reloading (8th Edition).
02 February 2010, 20:22
snowman
Dave Huntingtons usually have it in stock. Old Western Scrounger has it at times. when they run out it may be several months before they get more stock in. With a little work cases can be made from 338 or 458 win brass but it requires to use of a small lathe.
03 February 2010, 04:03
lawndart
You can always get it directly for Reimar Johannsen in Germany. It is a simple bank to bank wire transfer. I have done it many times.

RWS and Hulsen Horneber are the two manufacturers of brass that I know of.

When I get my next load of cases in, I will let you know. It usually runs about $2.00/case from Johannsen.

Natchez has it at times for $1.50/case

Good luck.


04 February 2010, 09:13
SDhunter
Martini has imported some, that is where I bought my last batch.

They had posted in the classifieds awhile back but I can't find the post.

info@martiniandhagngunmakers.com

I would email Mandy Martini at the above address and see if they still have some.
04 February 2010, 14:24
.404
I have about 80+ pieces,some once fired,the rest had the bullets pulled.Contact me if interested...I think $75.00 shipped is good.

.404


I pray for mud on my boots the day I die...
Go see the nights of Africa.....
05 February 2010, 17:00
VFR1
LawnDart, Suppose I can get Horneber 10.75x68 brass from Johannsen? Huntington's is out and does not expect to reorder. I have a bunch of Bertram 10.75, but is way too soft. Thanks.
06 February 2010, 08:28
lawndart
VFR1,

Yes,

Johannsen has it by Horneber, and maybe RWS.

It is well worth the tariff.

LD

BTW .404's price for the 9.3x64 is very good.