Somewhere, someplace, sometime ago, I thought I had read about reloading data for the 9.3X62 rifle but can't remember. Could anyone please help me. Thanks, Mike

how heavy a bullet do you want to load? I can give you a couple of good ones i have with 270 grain speers, but really i'm still kinda plaaying with the load work myself. also, there's some loads on the reloading section of this site.

You will find several loads in the reloading portion of this board if you will go to the home page.

You will be able to find some additional data if you will do a search on this forum.

Nosler did have some data on its home page; however, I believe it has been delete/superceded.

You may find some on the Speer home page given that they make a 27gr bullet.

Barnes, Speer, Nosler, and VV have data in their manuals.

If you are looking for starting data, you could use .35 Whelen from any manual as a starting point. The 9.3 is .366 in a blown out 30-06 case and the .35 Whelen is a .358 in a 30-06 case.

Hope this helps. Your question was a bit broad. Ku-dude

another source for information is Pet Loads by Ken Waters. The load I worked up last year for hunting was 60gr. of IMR 4320 with a 250 gr. ballistic tip. Got 2530 fps. out of mt CZ 550.

A fellow 9.3 user on this forum, GarBy, suggests 58 gr. of reloader 15 with 286 gr. Nosler Partitions. Not sure of his primers, but he may weigh in here. Are you out there GarBy ?

I load 61gr r15, 250nos.bt. 2631' per sec. 23.6" barrel CZ. Hope this helps. fws

Thanks again guys for the reloading data and info on where to find what I need. Mike

I have the CZ 550 American... My load is 59.0 RL-15, WLR primer, Lapua brass and the Barnes 250 X bullet....Velocity is 2500 FPS and it consistently groups under one inch at 100 yards...

Pygmy, a friend of mine is looking for a CZ American in 9.3x62. If you don't mind me asking, what did you give for it, Where did you get it, and how do you like it? Dr. Lou

Doc....I got it at J&G Sales in Prescott AZ about 15 months ago...At the time it cost me $450 TOTAL which included shipping and a few bucks for my local gun dealer who processed it...It comes with rings and integral bases...

I love it.....The fit and finish are superior to domestic models costing as much or more money...The single set trigger is a really nice feature IMHO... After some rountine load development it is shooting sub MOA groups right out of the box...No tuning, no bedding, no NUTTIN'... The recoil is sustantial but not abusive..Noticably less then a .300 mag or .338 of similar weight....It shoots a heavy bullet flat enough for the occaisional 300 yard shot...

What's not to LIKE ..??..... ........

[ 06-20-2002, 05:25: Message edited by: Pygmy ]

Eric98 and gang...yes I'm back...was on vacation. I've had real good luck with both RL-15 and H4895, and am now playing with H414. My best loads to-date have been with 58 gr of RL-15 and the 286 gr Partition....2365 fps and < 3/4" at 100 yds...5 SHOTS! I'm going to try 58.5 gr shortly....I'd like to hit 2400+ fps if I can maintain the accuracy and no pressure problems. I have used 58 gr of H4895 with the 250 gr BT for 2575 fps and < 1" accuracy....but I'm still working on this one. All of my loads are using Lapua brass and CCI 200 primers. As I develope loads, I will post the results. I am now trying out the Ramshot Big Game and Tac powders...very clean burning and temp. insensitive. I chrono everything over an Oehler so results are pretty accurate. My favorite bullet in this caliber is definitely the 286 Partition....maybe not quite as fast or flat as the BT, but very accurate and consistant. Gary.