Has anyone reloaded Hornady 180 fr Interbond with IMR 4350 powder. If so what was the formula? Results?

Bullsprig, I have had nothing but success using H4350 .64-65 grains with a 180 Partition/Ballistic tips and a Fed 215 primer WW case. Almost like it was the perfect powder for that cartridge. Good luck

I have the 300 Win Mag don't have the wsm but my 300 loves IMR 4350. I use it with all my loads no mater what bullet make.

I don't have any of the 180gr but got some in 165/150gr to try. In my 300wsm the 165 gr takes up alot more case capacity than I would like and magazine length. I'm going to try them in another caliber with a long magazine. I've had pretty good luck with R19/22 and N-550. I had good luck with H-4350 also and of the 5 powders that gave pretty much the same groups out to 300yds I settled on which one gave me the best velocity and that was R-22. I have not had any problems as to temp with either R-19 or R-22.

I am beguining to think that the 189's just might be to long for the short mag.

Sprig