The Accurate Reloading Forums
9.3X62 Gunsmith???

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/3221043/m/56310499

16 June 2003, 17:43
MARK H. YOUNG
9.3X62 Gunsmith???
A buddy of mine would like to build a 9.3x62 on an existing action that he has. Could any of you 9.3 nuts recommend a good gunsmith to do the work?
He would be looking for somebody who actually had experience with the 9.3x62. THX
16 June 2003, 18:27
Atkinson
John Ricks, Jack Belk, Jim Brockman, and Dennis Olson to name a few equally qualified smiths.
17 June 2003, 15:51
bill smith
Ray: i don't suppose you have contact information for the smiths you mentioned??
17 June 2003, 20:06
savage49494
Bill, I don't know about the others, but you can find Brockman here: http://www.brockmansrifles.com/
18 June 2003, 17:07
z1r
If you post over in the Gunsmithing forum JBelk will answer. Or you can email him by looking up his personal info. Lastly, go to the ACGG website they have a member listing. I know Mr. Belk is listed and possibly some or all that Ray mentioned.
19 June 2003, 06:47
Diamond D
John Ricks contact info:
rifles@earthlink.net
Phone 360-457-6931