The Accurate Reloading Forums
300 H&H

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/3221043/m/461107093

23 December 2005, 06:58
JimD
300 H&H
I loaded up a few rounds of 300 H&H for my new to me M70 this afternoon. That is one sweet looking round compared to the WSM I usually load for.

Jim D
23 December 2005, 07:55
vapodog
IMO the .300 H&H is a mile ahead of the WSM rounds!!!!!


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
23 December 2005, 17:54
Old Time LC Smiths
Glad you like it. How about sharing your load info for the 300 H&H.
23 December 2005, 18:23
fla3006
I bought my first 300H&H about a year ago, an FN Deluxe. Very accurate, easy on the shoulder.


NRA Life Member, Band of Bubbas Charter Member, PGCA, DRSS.
Shoot & hunt with vintage classics.
24 December 2005, 00:49
a_dalimata
the 300 h&h is a sweet long sexy cartridge exspecially with 220 gr RN bullets


the 45-70 132 years and counting
24 December 2005, 05:17
333_OKH
This is one of my personal favorites. In a stupid move a few years ago, I sold a Remington Model 721 in this caliber. The gun was rough, without blueing, but the action was smooth and the barrel like new.
25 December 2005, 09:09
BuddyK-9
The 300 H&H is a real sweethear to load for. Use most any slow burning powder, I normally use 4350 or 4831 or either variety and enjoy each round down range. NOT a fan of the Winchester short magnums of any variety. Guess I cut my teeth on rifle/cartridge combinations of the long type and never had the feeding or other problems associated with the new stuff these days.


"Only two defining forces have ever offered to die for you; Jesus Christ and the American Soldier. One died for your sins, the other for your freedom...."
25 December 2005, 17:30
Deans
Mine is a Browning FN. One load so far 200gr NP
over H4831SC, MOA at 100yds.

Deans
25 December 2005, 18:30
300 H-H
In my 39 mod-70 i use 66 h-4350 over about any 180 gr bullet it's a fairly mild load that clocks about 2950fps-it will shoot 1 interlock 1 partion and 1 woodleigh into right at 1 inch-3 different bullets into one 3 shot group.
30 December 2005, 05:22
Ballard4590
I have always wanted a 300 H&H. Everybody always raves about this accurate and smooth feeding cartridge. My dream rifle is a Browning on the FN action.
30 December 2005, 07:05
333_OKH
I have this custom rifle build that I am developing to send off to the gunsmith. I have always loved the H&H, but was thinking of building a little 6.5mm. Here is the deal. the rifle is already going to be big with a 26 inch barrel and a 15" length of pull on the stock. I could go to 300 H&H for no real extra cost....What to do? It is only being used on black bear, wild boar, and black-tailed deer for now. Most of the hunting is in wilderness and unroaded areas.
'
30 December 2005, 21:38
Frank Martinez
quote:
Posted 25 December 2005 18:30
In my 39 mod-70 i use 66 h-4350 over about any 180 gr bullet it's a fairly mild load that clocks about 2950fps-it will shoot 1 interlock 1 partion and 1 woodleigh into right at 1 inch-3 different bullets into one 3 shot group.


We have very similar tastes. I also have a '39 model 70. I had only been loading it with 4831 but your load is a temptation.
Frank
31 December 2005, 03:34
333_OKH
So what do you all feel is the best bullet weight for this caliber to take advantage of its unique characteristics.
31 December 2005, 03:40
a_dalimata
200 to 220 grns .
the winnys (long and short) and 308 normas dont have a thing on the 300 H&H with the heavys .
in the Barnse manaul the H&H beats them with the 250 grn original.


the 45-70 132 years and counting
31 December 2005, 04:21
333_OKH
If all you were going to shoot out of the old girl was 200-220 grain bullets (maybe a 180), what would the best twist be for a barrel?
31 December 2005, 22:42
a_dalimata
quote:
Originally posted by 333_OKH:
If all you were going to shoot out of the old girl was 200-220 grain bullets (maybe a 180), what would the best twist be for a barrel?

1 in 10 is standard twistand it works good with 165-220grs bullets . 1 to 9 would work good too for the 200-220 grs and for the barnses Xs.
i did a little work with the 200gr barses triple shocks before i ran out of $.
mommy !!! they were giving me great groups with all powders tried . better than the 200 gr speer 200 Grandslam that does MOA in my pre-64


the 45-70 132 years and counting
31 December 2005, 23:31
333_OKH
If I went with a 9 inch barrel what grain weights would I really be loosing due to instability?
31 December 2005, 23:33
jens poulsen
The .300 Holland & Holland shows up alot here on this forum beer

We had a poll sometime ago, and some 45% were
shooting H&H over the "rest mags".
The old .300 has still an appeal to many people, and in many cases it`s the only magnum
one ever needs. The .300 Win has a slightly larger casecapacity, however when shooting the
220-250grain bullets, the Holland & Holland comes in strong for its long neck and suddenly
have a large boilerroom for gunpowder.
I use only one bullet from now on for my H&H, and that`s 220 grain Hornadys.


DRSS: HQ Scandinavia. Chapters in Sweden & Norway
31 December 2005, 23:58
Savage99
I have had an original pre 64 M70 in 300 H&H and I find it a troublesome cartridge to load for. Also the rifle is heavy and long.

I would much prefer to carry and shoot the modern 300 WSM to any 300 H&H.

Mine is just a collector now.

Handsome is as handsome does and the 300 H&H never was a good design.

Sorry about that.


Join the NRA
01 January 2006, 01:30
333_OKH
S99, I see in the Gunsmith area you wouldn't mind getting rid of it too. I bet someone here would love it....