The Accurate Reloading Forums
FMJ Bullets Harmful??

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/3221043/m/395104657

03 November 2007, 08:25
hnts4fun
FMJ Bullets Harmful??
I have a pile of .308 non-corrosive ball ammo and was wondering if these rounds would negatively affect my barrel any more than any other round would.

Thanks
03 November 2007, 08:28
ramrod340
It shouldn't


As usual just my $.02
Paul K
03 November 2007, 20:13
hacksawtom
Much mis information has been spread about military FMJ bullets being harmful to rifle barrel because during both World Wars most if not all countries used copper clad steel jacketed bullets.

In "Hatcher's Notebook" he dispells the notion these bullets are "harder" on a barrel then a copper jacketed bullet. The steel they used for bullet jackets was actually softer than copper. The reason for the copper clad was simply to prevent rust! Steel was used due to the critical shortage of copper. Some shooting ranges don't like surplus ammo with bullets that attract a magnet simply for the reason they may start brush fires when the bullets strike rocks, causing sparks.

As for your .308 FMJ go shoot it but don't expect much better than 2" groups. Good luck.


Swift, Silent, & Friendly
04 November 2007, 03:04
hnts4fun
Thank you both for your feedback. I've got the ammo and would just like to plink...now...I will!
09 November 2007, 22:39
El Deguello
quote:
Originally posted by hnts4fun:
I have a pile of .308 non-corrosive ball ammo and was wondering if these rounds would negatively affect my barrel any more than any other round would.

Thanks


No, those bullets will NOT adversely affect your bore. But in the Army, we used to think that tracers would! I don't know if that's even true!


"Bitte, trinks du nicht das Wasser. Dahin haben die Kuhen gesheissen."
10 November 2007, 00:03
Buglemintoday
quote:
Originally posted by El Deguello:
But in the Army, we used to think that tracers would! I don't know if that's even true!


I have had people tell me that the tracers will burn out the barrel


"Let me start off with two words: Made in America"