The Accurate Reloading Forums
how much $$

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/3221043/m/14410889

30 March 2003, 01:24
john17
how much $$
How much money should someone be willing to drop to get a Winchester model 70 pre-64 feather weight. Just wondering and what about the post 64 model 70'S I think it would be neat to load a 264 win mag but it is difficult to find guns in this caliber. Thanks
30 March 2003, 01:40
cowboy77845
How much do you have? How badly do you want it ? What is the condition? Is it in a rare caliber? I have seen $500 rifles sell for $750 around here, they do not show up often. There is a featherweight (243) at a local shop in average condition for $550, problem is it has a Herter's muzzle brake on it. I paid $750 for a 1952 unfired featerweight in 308 and expected to be outbid. Probably a better question is "What is a fair price?" I do not know. It appears to me that some folks will pay too much and be happy. I use the "Gun List" as a guide. There is a 264 on gunbroker right now.
30 March 2003, 03:12
Savage99
To many a used pre 64 Winchester is worth a lot more than most new rifles if it's not buggered up too bad. Sometimes well installed recoil pads are welcome if you follow me.

If the old M 70 is close to new condition and not altered then the collectors bid the prices up.

I see nothing wrong with paying $700 for a nice one. At least you will be able to sell it and sell it quick if you don't mess it up yourself.
10 April 2003, 06:57
Atkinson
264's bring extra money and a FWT. 264 is a joke, you gotta have a lot of barrel to make a 264 work right....A std. wt. 264 has a 24" barrel and that works pretty well..They cost $1200 up....A poor choice of caliber IMHO.

A 95 percent 06 or 270 can be found for $600 give or take a hundred dollar bill....

A 98 percent plus will run costs up to $900 to a $1200.

Rare calibers and magnums run the price up even more.
10 April 2003, 07:02
TXPO
I just sold a 95%, late production, pre-64 fwt in .30-06 for $550.
13 April 2003, 12:09
Atkinson
Today I bought a pre 64 M-70 .308 for $500. and it is 98% metal, but the stock had a spacer and a recoil pad, sooooo....I just wanted a shooter and if it shoots maybe I'll stock it...I have a piece of Claro full fiddle deep red blank that must be 15 years old and it cuts to be very hard for Claro...I'm thinking very slim, a round bull sack grip as opposed to a steel grip cap, short 9" forarm and Silvers pad...maybe a panel on each side, hmmm, we'll see if it shoots first.
13 April 2003, 16:19
Savage99
Here in the NorthEast the prices are higher. Things cost more here. I get classifieds used as packing and you can buy a house out there in the West for beans. Here a starter house is $125,000.

M 70's go for more also. Just regional differences.

There is a .220 Swift here in a shop on consignment and they are asking $950. That's a little high as it's not that fine.
19 April 2003, 22:59
<bobcash>
A nice, original 264 Featherweight will bring in the 1000-1200 range..All had factory-installed, Winchester-marked recoil pads, BTW......It is the second rarest catalogued caliber in the Featherweight series....
Values of altered Model 70s in common calibers decline greatly over original ones. Condition is everything.......
22 April 2003, 04:56
Stonecreek
I agree that a pristine Featherweight in .264 will bring a collector premium, but for a shooter, Atkinson has it right -- the .264 does poorly with a 22" barrel. It needs 24 to 26 inches to achieve the velocities which make it something more than a louder .270.