The Accurate Reloading Forums
Lee tumble lube bullets

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/97510426

13 January 2003, 13:12
boondocker
Lee tumble lube bullets
Hi fellas
Well I cast up an loaded some 45 acp 200 gr swc with the micro groves. Does anyone shoot these and how far do you seat them. I went to the range today and I had feeding problems with them seated at 1.245 as it seems thesoulder sticks out farther than the hg#68. Do you think I can seat them a little deeper like 1.200 as long as they feed and no pressure signs. I am using 3.7 gr of Clays. Thanks Boon
13 January 2003, 16:55
Leftoverdj
Feeding problems, not lockup problems?

If they feed ok but the gun won't lock into battery (assuming a 1911 or variant), you need to seat them a little deeper.

I don't know Clays powder, but it seems unlikely that 3.7 grains of anything in a .45 ACP case under a 200 grain bullet would be dangerous.
13 January 2003, 23:34
NBHunter
To get them to feed right in my .44mag carbine I have to crimp in the very top groove.