The Accurate Reloading Forums
Intoducing the long Range Accubond!!!!!!!!!!!!!
31 October 2012, 22:52
POPIntoducing the long Range Accubond!!!!!!!!!!!!!
Bend, Ore. – October 31, 2012 – Nosler, Inc. is pleased to announce the release of their new line of AccuBond® Long Range bullets. Developed through a combination of bullet manufacturing techniques that are unique to Nosler, the design of the AccuBond®-LR allows for the highest B.C. possible in a bullet of the same caliber and weight. Designed with an optimum performance window ranging from 3,200fps to 1,300fps, the unique tapered jacket geometry and proprietary
bonding process of the AccuBond®-LR allow it to expand rapidly for effective energy transfer and significant tissue damage while retaining sufficient weight to ensure deep penetration into the vitals. The AccuBond® bonding process allows the AccuBond®-LR to perform reliably on game throughout the entire velocity range, eliminating the problem of being “too close” often encountered with other high-B.C. bullets. The high-performance boat tail, long ogive, and polymer tip combine to make the AccuBond®-LR the sleekest, flattest- shooting, bonded, hunting bullet ever created. The ogive of the AccuBond®-LR is designed to provide excellent accuracy in a wide variety of firearms without the necessity of being loaded close to or in contact with the lands. The new AccuBond®-LR will be packaged in 100 count boxes, and will initially be available in the following calibers and weights.
These are awesome! Nosler is going to take the long range market by storm.
Way to go Nosler.
31 October 2012, 23:24
whiplashlooking forward to trying the 210gr out of my Ruger #1 300Win.
31 October 2012, 23:36
gerrybwhen can you order these bullets?
31 October 2012, 23:47
POPSoon . I am not sure on availability yet.
I was just authorized to announce it today.
01 November 2012, 04:34
Lamarhey frank.
any chance of a 110-120 gr .257 ?
01 November 2012, 10:03
POPDown the pike I am sure
01 November 2012, 20:14
POPFrom what I understand all popular factory twists were taken into consideration before bullets were designed.
Hence the 129 6.5mm and not a 140...yet at least. Performance on game will be AB identical.
Feel free to contact Nosler with all tech ?????
1-800-285-3701. Fax: 541-388-4667
01 November 2012, 22:45
friarmeierHello POP - that is good news indeed :-)
Can you say how Nosler achieved the heavier bullet weights, esp. in 7mm? Is it by thinning out the jacket towards its base a little? (cross-section looks a little thinner than the pics of the regular AB jackets).
Thanks again!
friar
Our liberties we prize, and our rights we will maintain.
02 November 2012, 07:17
Lamarbet they use a 3% antimonial core and bonding too.
the harder core can take some of the pressure off the jaxket having to be so thick.
the hardness of the jaxket will help control it's opening too.
02 November 2012, 07:22
Lamarcan't edit a post for some reason.
but since these are slated as long range i am gonna assume they are meant to open at lower impact velocity's.
probably down in the 1300 fps range
the thinner jaxket ,deep hollow point,and the tip would be a requirement to help make this happen.
the higher antimonial core will help the thinner jaxket take the firing forces of the rifling better.
02 November 2012, 08:04
POP[quote="NoslerMP"]We are happy to see that everyone is so excited about these bullets, we are very excited too!
The AccuBond-LR bullets will be available in stores by the end of March 2013.
We designed this year's offerings to stabilize in standard twist rate barrels when loaded to standard book velocities, hence the 6.5mm 129gr. We determined that a 140gr would be too long to stabilize in standard twist barrels. We will consider offering longer, heavier designs intended for faster-than-standard twist barrels in the future.
Keep in mind, this is just our initial offering and we will be expanding the line in the future. If we aren't yet offering the weight or caliber that you want, let us know as we do take your requests into account when designing new products.[/quote]
04 November 2012, 02:20
DocWell, since they are offering the AB, we should request the long range ballistic tip as well. No question they will open at lower velocities. Any plans for them to do that?
Ted Kennedy's car has killed more people than my guns
01 December 2012, 07:43
friarmeierPop, I notice on Nosler's site that they prefer a 1 in 9 twist for the 150 gr. .270, though they also write that a 1 in 10 will suffice.
What do you think about a 1 in 10 twist .270 wcf? Is it worth trying? Will I have to run a minimum muzzle velocity to achieve good accuracy (moa)?
Or, let me put the question slightly differently: I have 150 partitions shooting moa or better in my .270. Do you think it's worth the trouble of developing a LR Accubond? Most of my shooting will be inside 400, max 450 yards. Should I just stay with the partition and call it good?
Thanks!
friar
Our liberties we prize, and our rights we will maintain.
Should be ok. The way they designed these was to be able to use them in all standard twists.
250grain .338! we need that one too!
.
31 May 2013, 22:55
LeopardtrackPOP, still waiting for the 7mm to be available. Any idea when?
Will the "regular" Accubonds be discontinued?
02 June 2013, 06:54
SnellstromIf you look on the website they are introducing the 6.5, 3 weights in 7mm and 2 in .308
http://www.nosler.com/Bullets/AccuBond_LongRange.aspx03 June 2013, 07:18
kev5000I hope they make a 270 grain 375 bullet
03 June 2013, 22:25
ARTJR338WMHow long before a 225grn .338?
04 June 2013, 03:09
LeopardtrackLooks like we're not getting a response here...