The Accurate Reloading Forums
loads for .243-06, & 6.5-284

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/90010875

04 April 2002, 12:48
<mcvmthtr>
loads for .243-06, & 6.5-284
anybody got a good load or 2 for the .243-06 or the 6.5-284 ? prefer something for ramshot powders but will try other powders also.

------------------
toymaker

04 April 2002, 12:54
Mark R Dobrenski
loads for the 6/06

IMR 4350/55 Noz Bt=4400-4600
IMR 4350/70 Noz Bt=4000
R22 or R25 95 Noz Bt=3500-3600

The 6/06 is a rockin round!

I'm on my second tube-have 4 other buddies that use em as well.

"GET TO THE HILL"

Dog

04 April 2002, 12:57
<1_pointer>
Mark, how many shots did you get out of the first barrel?
04 April 2002, 14:17
<mcvmthtr>
mark,i'm useing 55 gr of h1000 behind 85 sierra's now, haven't chrono'd them yet. just got the rifle used. an old bench rest with an enfield action, new hart heavy barrel
05 April 2002, 16:52
Mark R Dobrenski
I got 1600 rounds out of my first tube.

"GET TO THE HILL"

Dog

06 April 2002, 01:47
<OTTO>
I talked to sierra on the phone the other day about the 6.5-284. They suggested using their load data for the 6.5-06 and their 140 gr bullets. Drop it by 1 full gr for a starting load. And be sure to use federal 210 primers as many others are just too hot for the case. Seems a hotter primer will burn even the slowest burning powder too fast. The "efficient" case design aids in this procees by holding the powder longer in the case. I personaly experienced the pressure spikes in my rifle with what the barnes book showed a minimum loads.

Sierra starting loads
IMR4350....45.9
AA-4350....45.9
H4350......45.8
RE-19......47.3
N160.......46.4
H5831......47.3

good luck

------------------
From my cold, dead hands!
Thanks Chuck!

06 April 2002, 08:44
larrys
I started with 48g of AA4350 and am working my way up to 53 grains. The problem is I always get .5" groups so I don't know why I should go higher. .5 groups so far at 48,49,50,51 grains. Of course that is with 120-125 grain bullets (any of them).

------------------
Larry

[This message has been edited by larrys (edited 04-05-2002).]

06 April 2002, 13:20
<Elliot Viker>
I think that you could use 240WBY load information. The 6mm-06, 243-06, are nothing more or less than the 240WBY less the belt and radious sholder. The 284 also has very simular capasity to the -06 and load data could be used, but start low and work up.
06 April 2002, 17:58
Mark R Dobrenski
Elliot while I've not personally worked with a 240 Wby friends of mine that use them just can not simply keep up with the 6/06's that I load for. For that matter neither can my friends using 6/284's.

"GET TO THE HILL"

Dog

I would love to get a WBY Ultra Light in 240 for this spring bear season though-be kind of fun to play with. Oh now what have you done to me-got me thinking and that is a scarry thing. It would best my 6/06 by almost 3 pounds I bet.