Stoneypoint Chamberall Threading Pitch?

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/88410855

31 December 2001, 05:40

<Hutt>

Stoneypoint Chamberall Threading Pitch?

Doe any one know the threading pitch used on the stoney point chamberall tool? as I would prefer to use fire formed cases for more accurate seating depths.I can't seem to find what it is and don't want the hassle of sending fireform cases to them for drill & tappping.

31 December 2001, 06:28

<Bill>

5/16 X 36

------------------
www.rifleshooter.com

01 January 2002, 06:25

<Hutt>

Thanks Bill, This saves me alot of time and money....Hutt

quote:
Originally posted by Bill:
5/16 X 36

01 January 2002, 06:54

<Bill>

Funny, I just called the day before and asked.

It is a pretty hard tap to get, you may have to try an industrial supply place.

------------------
www.rifleshooter.com
Save a plant, shoot a deer!

01 January 2002, 12:28

Bob338

You can buy them directly from Stoney Point. They charge about 50% more than an industrial supplier. I paid $9 for mine but I don't recall where I got it.

01 January 2002, 15:03

<TGWoody>

I sent 4 fire formed cases to them, they sent them back to me in about 7 working days.

They tapped them (threaded) and inside necked turned them. They did a nice job.

Works Great

Good luck,
TGW