23 December 2002, 11:38
PuncherCross ref. for IMR7383 milsurp
Does anybody have the cross reference for milsurp IMR 7383?
Thanks,
Puncher
23 December 2002, 14:09
TCLouisPuncher
I would go back to the seller on that one (IF you can). I don't remember seeing that one unless it was wwwway back in the Thunderbird Cartridge days and I would NEVER trust my memory to be correct on what it compared to.
Jeff Bartlett may be willing to give you some information, but then since he did NOT sell it may be unwilling to stick his neck out!
LouisB
[ 12-23-2002, 05:10: Message edited by: TCLouis ]09 March 2006, 21:37
michael occhipintiMy experience with IMR7383 indicates that it gets faster as the case gets smaller.It is similar to 4350 in my 7MM REM mag and in cases such as the 225 and 22-250 it is like 4064.Due to its bulk you can't fit enough in the 22-250 to get full performance,I find it superb for the 303 British.8X57 Mauser and 7.62X54 Russian.It is also useful in the6.5X55 with heavy bullets[4350 data here]. All in all a real bargain.
10 March 2006, 08:08
bartschequote:
Originally posted by michael occhipinti:
My experience with IMR7383 indicates that it gets faster as the case gets smaller.It is similar to 4350 in my 7MM REM mag and in cases such as the 225 and 22-250 it is like 4064.Due to its bulk you can't fit enough in the 22-250 to get full performance,I find it superb for the 303 British.8X57 Mauser and 7.62X54 Russian.It is also useful in the6.5X55 with heavy bullets[4350 data here]. All in all a real bargain.
Sounds like a set up to me.

Sales must be slowing down.

Got to admitt though it is cheap addvertising. Get obvious!

roger
10 March 2006, 17:35
michael occhipintiThis is the first time I use this forum and I get this kind of drible for a responce.I do not sell anything.What is your problem?
10 March 2006, 23:04
bartschequote:
Originally posted by michael occhipinti:
This is the first time I use this forum and I get this kind of drible for a responce.I do not sell anything.What is your problem?
Long story Michael,
IF apologies are in order " I apologise. "

roger
10 March 2006, 23:31
michael occhipintiThanks Roger Iappreciate your responce.I do a lot of shooting and have experimented with this powder.I agree with all the cautions.This powder is not for the new reloader.In its limited application it does a good job,thanks,Mike