21 December 2008, 00:53
Homebrew.416 Rigby Dies
I plan to start reloading for the .416 Rigby. What dies would you recommend. Thanks.
21 December 2008, 01:26
bull1Personally, I think it's hard to beat anything from RCBS when it comes to reloading.
Bull1
21 December 2008, 01:55
ShinzoProbably the cheapest new are Lyman, if they are the same as the
Lyman Dies I use in other calibres they will be perfectly satisfactory.
Steve
22 December 2008, 07:53
lawndartRedding, and factory crimp die from Lee.
Polish the inside of the die no matter what brand you get. Work down to 400-600 grit sand cloth, and then Simichrome or such on a large sized chamber mop. You'll be glad you did.
LD
22 December 2008, 14:19
Shinzoquote:
Originally posted by lawndart:
Redding, and factory crimp die from Lee.
Polish the inside of the die no matter what brand you get. Work down to 400-600 grit sand cloth, and then Simichrome or such on a large sized chamber mop. You'll be glad you did.
LD
Although I'm a great fan of Lee FCD dies, the 416 Rugby case is large enough to require them to use the 1 1/4" x 12 threaded dies as used in their classic cast press with the 7/8" x14 thread bushing removed. They cost about $70 IIRC.
Steve
