Dillion 550,Resizeing Die Set Up ?

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/79510676

30 September 2003, 19:31

Tiny

Dillion 550,Resizeing Die Set Up ?

I have acess to a Dillion 550 press,and will be using RCBS dies in it.
Question- Can the Resizeing Die be set up to "Cam Over"( as to RCBS Die set up directions) like you can with the RCBS Rockchucker??

30 September 2003, 19:38

Mark

Without trudging out to look, I don't think so.

However, I have a bunch of RCBS dies I use in my Dillon 550 and they all work fine normally.

30 September 2003, 19:58

jsr

No,if I remember right you screw your die in till it touchs the shellplate and then back off 1/2 turn.Adjust as necessary for proper resizing.Theres pdf versions of the manual here.RCBS is what I use with mine also.
http://dillonprecision.com/manuals/manual.cfm?

[ 09-30-2003, 10:59: Message edited by: jsr ]

30 September 2003, 20:16

Tiny

Thanks.