The Accurate Reloading Forums
Powder suggestions for......

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/7951062902

14 March 2015, 12:43
drewhenrytnt
Powder suggestions for......
I am looking for starting loads.

300RUM 100gr Cutting Edge ESP Raptor.

I have H870, H4350, AA4350, and H4895. Any of those a viable powder? If so Where should I start?

Thanks
Andy


We Band of Bubbas
N.R.A Life Member
TDR Cummins Power All The Way
Certified member of the Whompers Club
15 March 2015, 04:26
RMiller
Find a load and try it. I had to test several for loading the 300 RUM with 200, 220 and 240 grain bullets. Some powders would be very slow with a couple weights but be very good with one.


--------------------
THANOS WAS RIGHT!
15 March 2015, 20:42
Blacktailer
You are shooting a 100gr bullet in a 300RUM???


Have gun- Will travel
The value of a trophy is computed directly in terms of personal investment in its acquisition. Robert Ruark
17 March 2015, 22:06
drewhenrytnt
quote:
Originally posted by Blacktailer:
You are shooting a 100gr bullet in a 300RUM???


Not just any bullet!

Cutting Edge Bullets ESP Tipped Raptor. I also have some 130 and 145 ESP Raptors. Being made of 2% leaded brass they are extreeeeemly looooong for weight.


We Band of Bubbas
N.R.A Life Member
TDR Cummins Power All The Way
Certified member of the Whompers Club