I shoot 300 grain Northfork cupped point solids out of my 375 H&H over 69.5 gr RL15. I have a barnes 300 gr tsx load that shoots to the same point of impact but I think i can do a little better on accuracy so I thought I would try the 300 grain semi spitzer from Northfork.

Question is with the Northfork Semi spitzer where should I start the powder charge to try to get the same POI at the solid?? Anyone use this combo??

I've used this combo in my 375 and had great success. As I remember the cup point solids were a grain or 2 under the soft point for same point of impact. I was using RL-19 as I recall. I am out of town working or I would check my records. The Northforks are accurate bullets and with the driving bands, I felt that velocity was easily obtained with lower pressure and less fouling. Good bullets and good luck. I feel you have chosen wisely.

I use that same combo, In my rifle it took a grain less to come to the same POI..but you have to shoot them to be sure, all rifles have their own idiosincs!