.429 Laser Cast 310 grn load for 44 Mag.

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/7591063122

22 May 2016, 23:45

packrattusnongratus

.429 Laser Cast 310 grn load for 44 Mag.

Haven't located a hunting load for the 310gr in SRH.44 mag. Anyone know of tested loads probably with H110/296 ? I need Start and Max if possible. TIA

23 May 2016, 16:07

p dog shooter

I use a max load of H110 under a 315gr hard cast out of a Lee mold.

One is not suppose to reduce H110.

I am getting just under 1300fps out of my 7.5 inch Redhawk and about 1200 out of my 4 inch.

23 May 2016, 19:24

ramrod340

Like P dog said max loads of 110 or 296. Looking at the hodgdon site for a 300 JHP they are using 18-19grs.

QL calls max a couple grains higher.

As usual just my $.02
Paul K

24 May 2016, 01:39

Fury01

I had great results with AA #9 in my Ruger Super Blackhawk with a 310 cast GC. It's a bit less picky about Max pressure than H110.
Memory says 19 grains but I don't have those records anymore so look it up for yourself.

"The liberty enjoyed by the people of these states of worshiping Almighty God agreeably to their conscience, is not only among the choicest of their blessings, but also of their rights."
~George Washington - 1789

11 June 2016, 22:00

packrattusnongratus

Bought the Laser-Cast Reloading Manual. The 310 gr wasn't even in it. Thought they might give tested data in the manual for all their bullets. Guess I made an incorrect ASSumption there eh? Still may use the 300 gr cast load to extrapolate the starting load for the 310 gr bullet. Thinking 18 gr H110 for my 9.5" barrel would be quite enough for hunting most anything. Using Starline brass and CCI LPM primers.