Hello all, I've been out with my 300wsm tikka shooting nosler accubond w/ R19 and I'm shooting an ok group at 100yds - two touching and one falling out .5 inches. I'm not happy with this, I've done some reloading with nosler combined tech silvertips and had great success in 7mm mag. Does anyone have any info/recipes they would be willing to share with me? The combined techs are 168 gr. I also bought some hunting ballistic tips 165 gr. and Hornady SSTs 165 gr. Looking to put something together for hunting, mule deer, whitetail, elk, and moose. I'm attempting to rag the hole with 3 shot groups at 100 yds.

Thanks in advance and have a good day.

My T3 in 300 WSM consistently shoots groups smaller than 0.5 MOA with RL19, WLRM primers and Hornady 165 gr Interbonds.

I have worked up loads for six different 300 WSM rifles so far. The load that worked well in ALL of them was as follows:

Win case
Fed 215M primer
near max load H 4350
Barnes 168 grain TSX

velocity 3100 fps
groups under an inch with all six rifles

Any given rifle may show other preferences. My own 300 WSM in a Remington 700 XCR shoots lights out with IMR 4831 and 180 Nosler Partitions or 180 Sierra ProHunters.

But the point is, ALL of these rifles shot well with the H 4350/Barnes 168TSX load.

Thanks for the responses. I think I'm on the right track, put two shots thru the same hole at 100yds and had one flyer less than .5 off. Off to work again and then maybe some play next weekend.