The Accurate Reloading Forums
What are the head diameters of .45-70 and .50-90

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/708109975

03 December 2006, 23:04
LongDistanceOperator
What are the head diameters of .45-70 and .50-90
(and their derivatives)

Thanks, LDO
04 December 2006, 05:18
TCLouis
Two different manuals state 0.608 for 45-70.

Cant find anything with 50-70 information at the moment.



Don't limit your challenges . . .
Challenge your limits


04 December 2006, 06:15
LongDistanceOperator
Thank you. All my info is still packed up from moving.
04 December 2006, 07:18
mete
50-90 Sharps rim - .663"
04 December 2006, 09:04
jackfish
.608" is the rim diameter for the 45-70. The head diameter is .5055" or .505" depending on the source. The head diameter for the 50-90 Sharps is .565".


50-90 Sharps Info


You learn something new everyday whether you want to or not.
04 December 2006, 16:28
hawkins
"Cartridges of the world" lists the 50/70 government as habing a base diameter of 0.565 in. The 45/70 is liated as being 0.608.
Good Luck!
05 December 2006, 05:24
ireload2
LDO,
You can take the numbers with a grain of salt.
The actual measurements for a .45-70 are a little smaller than listed and I do not have a 50/90 case.

The .45-70s usually measure .498 to .502 on the head and .600 to .602 on the rim.
The single .50-70 (seventy) case I have measures .565 on the head and .667 on the rim.
05 December 2006, 15:38
hawkins
ireload2; You must be loading the rare rebated rimless 45/70.
Good Luck!
06 December 2006, 03:32
ireload2
Hawkins,
What are you talking about?
06 December 2006, 04:04
concho
I have a R.P loaded 45/70 and the head is .498 / The Rim is .603 , I have 50/110 Starline Brass here and the Head is .544 The Rim is .602 Hawkins Take a little time to read the measurements .
06 December 2006, 17:06
hawkins
Sorry bout that, I thought he was saying the rim was smaller than the case. OOPS!