The Accurate Reloading Forums
Ramshot Enforcer powder

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/6961043701

13 April 2009, 04:25
Jules
Ramshot Enforcer powder
Been looking for something other then WW296 and H110 since they are so hard to come by.
Seems that Ramshot powders can be had.
Anyone using Enforcer in 357mag, 44mag or 480 Ruger?


Jules
20 May 2009, 03:09
Jules
I guess not Roll Eyes


Jules
20 May 2009, 04:33
Winchester 69
Alliant 2400, H4227, IMR4227 and Lil Gun are other substitutes.


________________________
"Every country has the government it deserves." - Joseph de Maistre
20 May 2009, 04:53
tnekkcc
Per the internet:
Enforcer = AA#9 = H108 = WC820

I have worked up loads with Enforcer and AA#9
7.62x25mm Tokarev 110 gr Starline brass
13.7 gr Enforcer primer falls out
14.3 gr AA#9 primer falls out

What does it all mean?
My AA#9 and Enforcer appear to be with in 4% of each other.
30 May 2009, 07:32
45/70 Thumper
Yes,I've even used it in my .40 (amazing fps and blast?! ) Been very happy with it. Works as well as the "standards".
01 June 2009, 04:03
Paul Owens
quote:
Enforcer

I've never tried the Enforcer powder,but I've been using there Zip powder in my 38 spl. and really like it.I'm new to reloading and e-mailed Ramshot,and they told me to use 4.8 grains starting load with 5.3 as max. behind a Hornady 125 grain XTP-Hollow point.I weigh each charge,paying close attention not to double charge.