The Accurate Reloading Forums
Deleted by User

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/679107382

15 June 2005, 00:43
DJM
Deleted by User
Deleted by User


Deer Management Training, Mentoring & DSC 2 Witnessing

Please PM or deermanagementservices@gmail.com for details

Dama International: The Fallow Deer Project


15 June 2005, 01:36
Savage99
Beware that I am getting air dents on WSM cases with Redding dies. They do not have a vent hole like RCBS dies do.

So far I have bought new RCBS dies for both the 270 and 7mm WSM and the 264 WM for that matter due to the denting of the brass.



I have not had dents from my Redding FL dies that have bushings.

RCBS makes bushing dies also.


Join the NRA
15 June 2005, 03:02
PC
Could you not have a precised hole drilled to create an air vent in the redding dies you already have ??
15 June 2005, 05:40
Savage99
FL dies are very hard. EDM would do it but the operation sheet might have it done before final polish.

The path of least resistance is to give them away to my local dealer. Down the road he will give me a break on something.


Join the NRA