roll crimp device

The Accurate Reloading Forums

roll crimp device

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/6411095811

12 October 2009, 21:34

yes

roll crimp device

hi
who is making very handy roll crimp device for 12 and 20 gauge? where can i buy such a little crimp kit?
regards
yes

Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy; its inherent virtue is the equal sharing of misery.

13 October 2009, 04:03

243winxb

Ballistic Products, Inc.

13 October 2009, 08:15

GSSP

One of these days I'll have to buy the "modern" version roll crimper that BP puts out but for what I've done in years past and present my old antique roll crimper works quite well. I simply use the attached clamp, attach it to a large piece of plywood stood on end and go to town to crimp my 2-1/2" 12 bore loads. You'll more than likey need to play around with wads, fillers and card wads to get the crimp just right but keep at it. FYI, I like to use 1-2 pieces of Cheerio's ceral to fill out the shot column just right.

Alan