The Accurate Reloading Forums
needed 7.65 argt. brass 2 rld

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/638106403

22 July 2005, 07:06
two j
needed 7.65 argt. brass 2 rld
looking to buy dies & brass to rld ,any out there. reply @twojturtle@hotmail.com thanks
22 July 2005, 10:28
cal30 1906
I just bought a set of Lyman dies for this caliber at Midway usa.com
You can make your own brass from 8x57 mauser or the .3006'.
You can also buy loaded shells at sportsmans giude.About 20.00 per box.(Norma)
I got lucky when i got my rifle I got about
100 once fired with it.




If it cant be Grown it has to be Mined! Devoted member of Newmont mining company Underground Mine rescue team. Carlin East,Deep Star ,Leeville,Deep Post ,Chukar and now Exodus Where next? Pete Bajo to train newbies on long hole stoping and proper blasting techniques.
Back to Exodus mine again learning teaching and operating autonomous loaders in the underground. Bringing everyday life to most individuals 8' at a time!
22 July 2005, 12:13
bill8mm
You can buy Hornady dies and new brass with Graff's at Graff and Sons. I bought brass from them and I'm very happy with it. Dies are $30 and the brass is $26 per hundred.
22 July 2005, 12:15
bill8mm
Sorry I meant to say the brass is head stamped with Graff's name
22 July 2005, 21:19
El Deguello
Graf's and Hornady both sell 7.65X53mm brass. I believe almost every die nmaker makes reloading dies for it.

Look on e-bay for good prices on dies......


"Bitte, trinks du nicht das Wasser. Dahin haben die Kuhen gesheissen."