25-06AI will a 25-06 seating die work??

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/634103821

11 April 2004, 09:55

voldoc02

25-06AI will a 25-06 seating die work??

I will be receiving my 25-06 AI back in a few days. Will regular RCBS bullet seating die work w/o deforming the sized case (fireformed case) .. thaks Doc Stone advise asap

12 April 2004, 01:30

voldoc02

bbt

11 April 2004, 11:04

POP

Yes you can. It will resize the neck and will not touch the shoulder. I used the same setup to neck size my 223 AI 40 degree. Worked great!

11 April 2004, 12:19

voldoc02

Thanks for the response.. How about the seating die?? thanks, Doc Stone

12 April 2004, 02:06

dan belisle

Should work OK, I used the same methods for one of my wildcats until I got the die set. - Dan

12 April 2004, 08:30

Sheister

Should work fine if you understand how to adjust the dies properly.
Of course, you will eventually need a full length die set for the AI case anyway, so why not go ahead and order the set now and save the trouble later when you really need it?- Sheister

13 April 2004, 05:08

voldoc02

btt

13 April 2004, 06:02

Arts

But why buy a set? The seater die will work as is, so all that needs to be purchased is a FL sizing die, and the standard neck die will work as well. So, instead of a set (FL, neck, and seater), just get a FL for when it's required. Lot of money saved.