nosler accubond data?

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/632101823

05 September 2005, 02:36

dennis duke

nosler accubond data?

Does anyone know whereto get data for the accubond, manual or website. Looking to load 150 gr. accubond in 308 win. Thanks

05 September 2005, 02:42

vapodog

as long as you start 10% down and work up I'd not hesitate to load it the same as any 150 grain bullet in the .308

///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill

05 September 2005, 04:45

7Rumloader

I started with nosler BT load data and ended up with 48.7 grains of Varget max in my friends gun that I load for. Nosler max for the 150 BT is 48.5 grains of Varget. Reduce the load I listed by a couple of grains and go from there.
Varget was the only powder I tried.

Guns and ammo what more do we need?

06 September 2005, 03:20

El Deguello

Nosler essentially recommends the same data for these as for the Ballistic Tip bullets-use any Nosler manual!

"Bitte, trinks du nicht das Wasser. Dahin haben die Kuhen gesheissen."

06 September 2005, 05:54

SakoL61R

Try this site:
http://www.noslerreloading.com/phpbb2/
Sako

06 September 2005, 08:37

Ackley Improved User

Have you noticed that many of the 308 loads in the latest Nosler manual are really HOT! Some, according to QL, are estimated to be at 70,000 PSI. What gives?