What thread on Stoney Point??

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/628107698

23 July 2008, 17:24

McFox

What thread on Stoney Point??

Does anyone know the thread on a Stoney Point OAL gauge?
The reason I'm asking is because I don't want to use the standard screw-on brass which Stoney provides. I want to use brass which has been fired from the particular gun which I am measuring for.

23 July 2008, 18:43

woods

https://forums.accuratereloading.com/eve/forums/a/tpc/f/...=224107008#224107008

____________________________________
There are those who would misteach us that to stick in a rut is consistency - and a virtue, and that to climb out of the rut is inconsistency - and a vice.
- Mark Twain |

Chinese Proverb: When someone shares something of value with you and you benefit from it, you have a moral obligation to share it with others.

___________________________________

23 July 2008, 18:49

McFox

Cheers, Woods!

23 July 2008, 22:12

US1

Do you have a drill press and a vice-jig if your trying with a hand drill good luck hole must be straight and even with a drill press it will take a few to get it dead nut on.

Eagles from above