The Accurate Reloading Forums
Re: 12 bore 2.50 inch case

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/617108511

16 August 2004, 07:55
Geo.
Re: 12 bore 2.50 inch case
Hodgdon has data Winchester AAHS 2&1/2 inch hulls. Otherwise try Precision Reloading and Ballistic Products. Both PR & BP have all sorts of shotgun stuff not found elsewhere, and at least one of them publishes its own data for strange stuff, oddball cases, and black powder. Call them if needed. I have done business with both and am well satisfied.

www.hodgdon.com
www.ballisticproducts.com
www.precisionreloading.com

Hope that helps,
16 August 2004, 19:40
Geo.
Quote:

Thanks,

Looks like Precision Reloading is the place. I had tried Ballastic Products and the show they have dropped the wads for the 2.5" 12 bore.
I hadn't checked Hogdgon's web site, but the manuel wasn't helpful. I only see information on the 2.5 in .410 bore today on the web site.



I would consider loading with old-fashioned nitro, fiber, cork, etc. wads--that's one of the reasons that I listed these sites. I started loading shotgun shells in about 1958 and that was all we had then. I now load black powder paper cases with old-fashioned wads and a roll-crimp (along with my other stuff, like trap loads with plastic).

The information on Hodgdon's website was listed under new data and was only for Win AAHS hulls.
15 August 2004, 04:05
AfricanHunterFortner
Does anyone have or know of a source of reloading data for the 2.5 inch?

Thanks,