The Accurate Reloading Forums
Going slowly.....

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/6131094231

12 May 2010, 00:21
Nappers
Going slowly.....
Gang,

My reloading endeavor is going slowly. I have some printouts, some good advice and got my press mounted securely on my bench.

I even got a casualty.....


But never fear, the RCBS stuck case remover works great!


The case preparation is tedious, but I am measuring each case (I have 170 cases) and taking my time and learning how things "feel". I am off no more than +- .001 2.484!


Getting fun, can't wait to make one go bang!


====================
You know it's going to be a bad day when you crossthread the cap on the toothpaste
12 May 2010, 01:10
Dago Red
Just a note, I don't know if you're trimming them all, I go through and measure them all, the ones that aren't over the max case length (I think 2.494 for 06 IIRC) I set aside to load, I only trim the ones that need to be trimmed. I didn't know if you trimmed them all or not.

Good luck.

Red