The Accurate Reloading Forums
M1A Chambering problem

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/577103642

05 April 2005, 18:34
CRSinTN
M1A Chambering problem
I recently reloaded some .308 rounds for a friend's M1A. The rounds were loaded with Winchester primers, 40.9 grains of IMR 4064, Sierra 165 gr. HPBT bullets, in once-fired Remington cases. Most would only chamber 2/3 of the way. I used RCBS FL sizer dies and checked the completed rounds with a Frankfort Arsenal Maximum Cartridge gauge. Several of the rounds would not chamber in the rifle. Most of the ones which did would not extract, even though they were not loaded "hot". What am I missing?
05 April 2005, 18:54
NBHunter
You may need to use a small base full length sizer. My friend has one of these rifles but we got lucky and a regular FL sizer works. Neck sized rounds will not. The brass may have too much memory and returns somewhat to a larger case size.


---------------------------------

It's better to have it and not need it than to need it and not have it
05 April 2005, 23:26
fredj338
Definetly try a small base sizer die. Make sure the OAL isn't putting the bullet into the lands.


LIFE IS NOT A SPECTATOR'S SPORT!