27 January 2002, 13:25
<AVMcGee>22 Dasher
Anyone with expierence with the 22 Dasher?
Does it equal the velocity of the 22-250 and 220 Swift with less powder?
I think it is fireformed from the 6mmBR.
Is it hard to fireform?
Thanks for any information.
Andrew V. McGee
28 January 2002, 08:49
ricciardelliIt's the same as the .22 Dancer and .22 Vixen and .22 Blitzen, and even the .22 Rudolph...
28 January 2002, 09:14
<AVMcGee>Thanks for replying , but I still have no answers to my questions?
AVM
28 January 2002, 09:28
DB BillThe case is made from the 6BR and is basically a .22BR with the shoulder pushed forward and it is supposed to easily match the Swift and the 22/250.
Forming the cases is easy...with 6BR brass you use a 22BR die set to reduce the neck length down to where it will just fit into the Dasher chamber with some feeling...load and fireform,,,normally need to use a top-end load for the regular .22BR to insure the case forms properly.
If you are really interested you should go to www.varminthunters.com and pose the question....there are a lot on that forum who use it.