Friends-

Are there some vendors or services that will prep your brass for you?

By prepping I am defining that as the following:
Reaming/making the primer pockets uniform
Chamfered Case Mouth
Deburred Flash Hole

I need to start working up some loads for one rifle, in particular but, I can barely make myself start the tedium of prepping the brass.

Send me the rifle, dies, brass etc and I'll do it for you. Might take 15 or 20 years before you get it back however.

Sheesh, you could have had most of it done in the time it took you to turn on the computer, log in and post your message.

Check Nosler for your cartridge, They might have what you want. They sell fully prep`ed brass, wgt sorted, trimmed, chamfered, pockets uniformed & chamfered, ect.
If they can`t help I can vouch for Tailgunners work.

quote:

Originally posted by 30 Caliber Mag Fan:
Friends-

Are there some vendors or services that will prep your brass for you?

By prepping I am defining that as the following:
Reaming/making the primer pockets uniform
Chamfered Case Mouth
Deburred Flash Hole

I need to start working up some loads for one rifle, in particular but, I can barely make myself start the tedium of prepping the brass.

Do it yourself then you have no one to blame but you!! Good or Bad!!!

I can see your need “30 Caliber†but I think you’ll spend a lot more having someone prep your “average†cases instead of buying premium cases.

Ol’ Joe is right.

Friends-

Thank you all for your comments.

Thanks to Tailgunner, I prepped the first 50 rounds yesterday. Will do another 50 rounds today.

This is for a .264 Winchester Mag so there isn't a great deal of premium brass for this specific round. Of course I could purchase some premium 7 Mag Brass and neck down but, there is still plenty of .264 brass around.

I was working with Winchester Brass and it was really in pretty good shape. Didn't have much in the way of burrs in the flash holes and was really pretty uniform.

If you aren't enamoured with case prep work, but bite the bullet and buy expensive brass that is prepped, like Lapua or other brass that is like it.
Personally, I'd much rather be doing something other than case prep work, but I do the work anyway cause I know it produces results.

Don

quote:

Originally posted by 30 Caliber Mag Fan:
...Are there some vendors or services that will prep your brass for you? ...

How much are you interested in paying to have it done? Not including Shipping in both directions.

quote:

Originally posted by Ol` Joe:
Check Nosler for your cartridge, They might have what you want. They sell fully prep`ed brass, wgt sorted, trimmed, chamfered, pockets uniformed & chamfered, ect.
If they can`t help I can vouch for Tailgunners work.

They can also add primers, powder and the bullets and you can really save time.

quote:

Originally posted by Wink:

quote:

Originally posted by Ol` Joe:
Check Nosler for your cartridge, They might have what you want. They sell fully prep`ed brass, wgt sorted, trimmed, chamfered, pockets uniformed & chamfered, ect.
If they can`t help I can vouch for Tailgunners work.

They can also add primers, powder and the bullets and you can really save time.

might aswell go buy some factory stuff then! itll be a faster turn around!