The Accurate Reloading Forums
204 case trimmers

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/507100771

11 January 2005, 09:14
jthurman
204 case trimmers
I have always used lee case trimmers. What are you guys using to trim cases for the 204 Ruger
11 January 2005, 09:22
Mark
I use a lyman case trimmer. I made a pilot for it from some round bar stock, but you could just as well chuck a 22 caliber pilot in a drill and use some sandpaper on it.


for every hour in front of the computer you should have 3 hours outside
11 January 2005, 09:38
jthurman
hey, thanks alot
11 January 2005, 23:54
Silverfox
jthurman-- My case trimmer for the .204 Ruger cases is a Wilson. I bought a .222 Magnum case holder, adjusted the trim length to 1.8425" and I'm in business.

I also bought a .204 caliber pilot for my Forster trimmer from Gunstop Reloading Supply, but I have that set up for trimming my .17 Remington brass and prefer to leave that set up exclusively for that.


Catch ya L8R
12 January 2005, 00:45
vapodog
quote:
My case trimmer for the .204 Ruger cases is a Wilson


Me too....excellent tool


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
13 January 2005, 07:13
jthurman
next question
are you using the 17 cutter or the standard cutter for the 204
14 January 2005, 04:00
Silverfox
jthurman-- I use the standard cutter for the .204 Ruger casings on my Wilson case trimmer.


Catch ya L8R