I second the vote for RL 22.

Geronimo

Reloder 22 or Reloder 22 or Reloder 22! LoL

I find it to be a very accurate with high velocities, 2800 fps+ out of a 22" barrel, with low chamber pressures.

I have also found that loads developed at 20c (70f) only loose about 100 fps when fired in freezing, or slightly below, temps. (Or in other word almost identical losses to what I see in the same cartridge using H4831)

"

Quote:

---

Bullet: Nosler 180 Grain Partition
Powder: 55.0 grains of IMR-4350 "


Me too. Maybe even a scoch more of the 4350. roger

Back when I reloaded my 30-06, I liked H-4831 and Reloder 22 for the 165 and 180 gr bullets. Got good results with the 150's with just about everything, IMR-4895, Reloder 15, Accurate 2700, and IMR-4064.

Bullet: Nosler 180 Grain Partition
Powder: 55.0 grains of IMR-4350
Primer: Winchester 8-1/2
Case: Winchester
Firearm: Ruger 77R
Optics: Leupold 4.5x14AO
Velocity: 2,705 FPS @ 15' from muzzle
Accuracy: <1" for 5-shots @ 200-yards

My second choice is:
IMR-4064 From 37.5 grains to 50.0 grains
Winchester WLR Primer

Most accurate 180 grain load for my rifle is 60.0 gr H4831SC, 180 Rem PSP, Fed brass and 210 primers. S40

H4350, H4350 and H4350...

jorge...I've have five, slightly used l lb. canisters of powder based on such recommendations

I've mainly shot 150s and 165s out of my 06s for the past few years. I did try some 180 Hdy SPILs out w/ some H380 awhile back but, they were mainly for short range work.



I have a couple of boxes of .308 180 NBTs on hand and I was wondering what you guys are pushing your 180 pills w/ in the ole' 06'?



I'm thinking of going the H4831SC route but, I've got R22, R19, IMR4350, H380, and H4895 on hand for this cart. as well. I believe they'll all work w/ the 180s but, I wanted to cut to the chase and see what you all have been lucky w/.



Thanks,



Reloader