I am having a tough time finding reloader 22 due to shortage in BC.Anyone use reloader 25 and if so what load?I have been loading 180gr accubonds& hornady interlocks.I also have 165gr interlocks here.
Thanks in advance RB

Allaints web site list the loads you want. I'm guessing it will be a little slow for 165's but fine for the 180's and up.

As well as I liked RL25 in my .300RUM, I cant get it to group in my .300 Winnie with 180gr. bullets or anything else for that matter...sakofan....Good luck.

Buck:

I tried it and it did so/so. I agree with Rogue 6 that you are going to find it sort of too slow to get good velocity out of a 165 grain. I would consider it even borderline on the 180s.

I'd drop to RL 19 before going to RL 25.

RL 25 or H1000 in a 300 Win Mag, with a 220 grain, gave me a very accurate screaming machine. I used a load I saw in an older Loading manual but it did fine! Velocity with the 220 was at 2975. I couldn't get it to break 3,000 fps, but hey, what little difference would that make. It sure made a 'clang' that everyone on the shooting line noticed when it hit the 300 yd gong.

Load was 83 grains of H 1000 and a Federal Large Rifle primer. ( not a mag primer.) I also used 83 to 85 grains of RL 25 with that. ( can't rremember exactly as I don't shoot the 300 mag that often.) Work up though, ( oh you are from BC) EH?

Cheers and Good shooting
seafire

Where you at. The shop in Prince George has some.

I am in Kamloops,I found some in Vernon today.I am trying to arrange time to get there before the last couple of lbs are gone.I work now until sunday AM.And Yes I am in BC eh!LOL

Bob Hagel's favorite load in a .300 Win Mag was 78.5 grains of H4831 with a Federal 210 primer and a 180 grain Nosler Partition (3150 fps from 24 inch barrel). I have found this to be a great load (less than 1/2 MOA) using Nosler balistic tips for targets and varmits. I like to 180 grain Swift Scirocco for Whitetails and black bears. I think it would work fine for elk and moose too. Work your loads up as I found this load to show presure signs on a friends rifle before reaching the aformentioned loads.
Good luck
Longshot

Reloader 22 is THE powder for the 300win, but if unavailable try IMR4831 or H4831SC (good Aussie made powder).

I did'nt have much luck with the IMR4831.I have 1.25-1.3" groups using IMR7828,I am fine tuning to see if I can get tighter.I just wanted to see if the RL22 would make any difference.