The Accurate Reloading Forums
110 vmax in a 30.06 AI

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/481105735

11 September 2006, 16:16
Alex.Y
110 vmax in a 30.06 AI
looking to have a dabble with some 110 gn vmax for a devastating varmint load in a 30.06 AI, anybody tried them and does anybody have the info on min and max load using N150?

Thanks
11 September 2006, 18:10
LorenS
A friend of mine uses them in his 300 magnum for coyotes and says they are accurate and work well on impact. I don't have load data for the Vmax.

Nosler has 30-06 AI load data for their 125g ballistic tip that would probably make good starting loads. They show 54 to 58 g of N150, Win brass, WLR primer and 125g ballistic tips - 3100 to 3300 fps.
11 September 2006, 18:28
Savage99
Here is a link to N150 powders from the Reloaders Nest

They didn't have anything for the Improved 06 but you should work up anyway.

I would search for loads from the Vhit. manual and interpolate. Blasting pests with large bullets is spectacular.

I tried some of those 110 VM's in my new 308 with so so results but maybe it was the gun or me! Good luck.


Join the NRA
11 September 2006, 23:21
ELKMAN2
I use them in my 300 Mag. to shoot PD's. very accurate and devestating!!!
12 September 2006, 01:14
jjmp
alex, don''t forget the 125 speers TNTs sorry iv''e not played with the 110 vmax 30 cal bullet...jjmp
12 September 2006, 01:27
Alex.Y
jjmp,

I have used the 110gn hollow point speer in the 7mm08, now that was a laugh on small stuff, rabbits
and foxes definately didnt like it up 'em!