MOTOR MICA DRY LUBRICANT

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/478108944

21 March 2006, 04:15

soup

MOTOR MICA DRY LUBRICANT

FOLKS,
Does anyone know where I can buy MOTOR MICA dry lubricant to do the inside necks of my 22K HORNET brass ? I was hoping someone could tell me a local bsiness of some sort that would use it commercially . Is it the same as graphite ? What are you all using ?I'm open to all suggestions .
Thank you in advance for your time & help.
SOUP

21 March 2006, 04:24

billinthewild

Not sure about "Motor Mica" but you can try Midway or Brownells for mica dry lub.

"When you play, play hard; when you work, don't play at all."
Theodore Roosevelt

21 March 2006, 06:34

Dwight

I got mine at Ballistic Products Inc.

21 March 2006, 08:54

Ol` Joe

I`ve tried mica and it does work but I have went back to a nylon brush and a dab of RCBS or Imperial in my necks. The mica is also messy if one isn`t careful and IMO doesn`t do quit as good a job.......

------------------------------------
The trouble with the Internet is that it's replacing masturbation as a leisure activity. ~Patrick Murray

"Why shouldn`t truth be stranger then fiction?
Fiction after all has to make sense." (Samual Clemens)

"Saepe errans, numquam dubitans --Frequently in error, never in doubt".

21 March 2006, 09:29

buckshot

I've been using Motor Mica for decades -the same 1# can!
Try www.ballisticproducts.com