Guys:

Anyone have any Hollywood Gun shop shell holders, or a source?

Thanx

Jerry

Jerry, If you are talking H/wood Turret press, The big wheel on top, and a 4 position shell holder turret on the ram, Easiest way is to adapt to the snap in shell holders . Just checked Midway and it looks like this:

RCBS Shellholder Adapter H
Product #: 404696

There is a 1/2" threaded stem with looks like 20 threads per inch thread, then a larger section at top about 1" dia, which should be about 1/2 " long , and this is machined to take the snap in shell holders. Corchoran made several varieties of press , but the 2 or 4 position shell holder attachment on the end will take these adapters. A lot of the old H-Bar presses used the same adapter. It ain't an orphan-

Systeme98:

While my press is a single stage, with about a 4" ram, I think your suggestion will work. The shell holder has a threaded shank which is secured to the press with a nut, and looks like the one you suggest. I will pick one of these up and put her back in service. Thanx

Jerry