The Accurate Reloading Forums
Rel 25

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/3781063911

26 October 2009, 06:34
H�ctor Carlos Roveda
Rel 25
What iss the best for Reloader 25. Only the overbore news (.300 RUM, etc)? or it's good too for old cartridges: 7 RM, .300 WM or H&H, etc.
Thanks in advance.
26 October 2009, 06:47
30378
My 300 Winchester loves it with 165gr Accubonds. Works fairly well in 257 Weatherby but IMR-7828 is better.


Free men should not be subjected to permits, paperwork and taxation in order to carry any firearm. NRA Benefactor
26 October 2009, 16:25
416RigbyHunter
I get the fastest speeds with RE25 in my 300WinMag, 300Weatherby and 25-06. I'm about to try it in my 270Win and 270Weatherby with 150gr bullets.
I think it would go alright in the 7RM with bullets heavier than 140gr, try it and see!
27 October 2009, 04:44
H�ctor Carlos Roveda
quote:
Originally posted by 30378:
My 300 Winchester loves it with 165gr Accubonds. Works fairly well in 257 Weatherby but IMR-7828 is better.

WHAT LOADS?
THANKS IN ADVANCE
HECTOR
27 October 2009, 04:45
H�ctor Carlos Roveda
quote:
Originally posted by 416RigbyHunter:
I get the fastest speeds with RE25 in my 300WinMag, 300Weatherby and 25-06. I'm about to try it in my 270Win and 270Weatherby with 150gr bullets.
I think it would go alright in the 7RM with bullets heavier than 140gr, try it and see!

.300 WM .25-06 AND .270 WIN. WHAT LOADS?
THANKS IN ADVANCE
HECTOR
27 October 2009, 06:08
405wcf
This is my favorite powder behind 400gr bullets in the 416 Rigby. Excellent accuracy and full case of powder may help keep the bullet in place under recoil.
27 October 2009, 06:55
Buliwyf
My .300 Winchester and 180's chrongraph at 3080 fps out of 24" tube. MOA.

I tried Reloader 25 in my .416 Rigby behind a 400 gr bullet and did not get the results I was looking for.