The Accurate Reloading Forums
358 norma mag

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/36710175

27 February 2002, 15:22
velvetant
358 norma mag
I would like to here some of you're favorite loads for this caliber. I'm building up a rifle.
Thanks

07 March 2002, 15:04
ACRecurve
Hey Velvetant,
I'd like to see some of those favorite loads for the 358 Norma too! Maybe some of the guys on the new Medium Bores section would help us out!
Good Hunting,

------------------
Andy Cooper

08 March 2002, 00:43
steve y
I worked up a good load with Swift 280 gr. A-frames and IMR4350.

It does about 1.25 MOA but I'm still playing with seating depth and crimp.

Charge weight and seating depth will depend on your gun.

I'd go heavy for caliber. That's where you start to see its advantage over the .338s

09 March 2002, 12:21
snowman
A near max load of IMR 4350 and a 250 gr spitzer is hard to beat.The Speer & Hornady 250's work but will come apart at close range. The Nosler partition is very good and the Swift may even be better for holding together. RL 19 should be good with the heavier slugs also.
17 March 2002, 18:54
<Red Rhino>
My only load I use in my 358 NM is 77.5gr IMR4350, 250gr Speer for 2750 avg. Very, very accurate. Its on a '43 M98 24" bbl
18 March 2002, 13:09
dan belisle
77 gr IMR 4350, with every 250 gr bullet I've tried. 2800 fps, and , depending on the bullet, decent to good accuracy. - Dan