The Accurate Reloading Forums
Coloring brass

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/363102094

04 June 2006, 12:14
Styme
Coloring brass
Hello all, I would like to color code my 7 30 Waters brass to keep in straight from my 30 30 brass, any suggestions?

Thanks
Styme


**********************
The Marines have a few good men, US Navy Corpsman.

I am a PROUD member of PETA (People who Eat Tasty Aminals)
04 June 2006, 14:11
vapodog
There are colors available for the majik marker.

It's not perfect but works better than nothing. It also don't seem to effect the brass any.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
04 June 2006, 23:15
johnch
I have used Brass Black on cases before to keep 2 different guns brass seperate .
I put some on a sponge and applyed it to just the case head .
100 only takes a few min to do

BRASS BLACK METAL TOUCH-UP by BIRCHWOOD CASEY

It will come off after several trips thru the tumbler .

Johnch


NRA life
Delta
Pheasants Forever
DU
Hunt as if your life depended on your results
05 June 2006, 00:57
Grumulkin
You could use nickle plated for one and brass for the other.

A Magic Marker works on the case head as well.
05 June 2006, 05:32
Styme
Thanks all

I think the Brass Black Metal Touch-U by Birchwood Casey is just the thing I am looking for. Thanks again


**********************
The Marines have a few good men, US Navy Corpsman.

I am a PROUD member of PETA (People who Eat Tasty Aminals)