The Accurate Reloading Forums
.270 factory ammunition

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/3501081752

06 February 2020, 04:39
Oddbod
.270 factory ammunition
Been a while since I posted here but I have a request.

I'd appreciate it if anyone who can do so would post the make, bullet type & weight & OAL of any factory ammunition they have to hand.
If you have a Hornady OAL gauge & the relevant insert, the length using that would also be appreciated.

Thanks in advance

Mike
06 February 2020, 05:30
South Pender
Sako, 156-gr. Hammerhead (bonded soft point); COAL: 3.25".


______________________________

The trouble with the world is that the stupid are cocksure and the intelligent are full of doubt.
- Bertrand Russell
06 February 2020, 07:20
30.06king
.270W
Hornady Superformance, SST 130 gn
COAL 82.00 mm


Hunting.... it's not everything, it's the only thing.
07 February 2020, 03:33
Stonecreek
Most factory .270 runs around 3.2" + or - .05". SAAMI maximum is 3.34", I believe. The bearing surface usually starts about .2" ahead of the case mouth, but that can vary a great deal with the brand and type of bullet.