The Accurate Reloading Forums
Site Updated

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/34110946

02 May 2003, 10:40
ricciardelli
Site Updated
New and/or updated data at the following:

http://stevespages.com/page7.htm Firearms
http://stevespages.com/page7a.htm IPB Of Firearms
http://stevespages.com/page7b.htm Firearms Owner Manuals
http://stevespages.com/page8.htm Reloading
http://stevespages.com/page8b.htm Software Download
http://stevespages.com/page8c.htm Reloading Data
http://stevespages.com/page8d.htm Cartridge Drawings And Dimensions
http://stevespages.com/table1.html Favorite Loads
http://stevespages.com/table3.html All Kinds Of Good Stuff
02 May 2003, 10:46
sakofan
Steve, I would like to thank you, for all you do for us reloaders.
I can't tell you how many times I have looked up a particular cartridge, maybe even a obscure one, and have all the info at my command, to lock and load.....Sincerly, Thank You!!!...sakofan... [Smile]
02 May 2003, 10:58
ricciardelli
Thank you... [Roll Eyes]
02 May 2003, 12:48
Ol` Joe
Steve you`ve built a most impressive reference site.
How do you manage to gather all the stuff you do and put it on your site while still roaming these sites? Ya gotta be twins [Big Grin]
02 May 2003, 14:29
Vibe
Steve
I looked for the 4.6x33 H&K and the 5.7x28FN
Is the 4.6x33 H&K really 0.177? Same as air rifles or is it a 0.172 17 caliber?
02 May 2003, 15:53
ricciardelli
quote:
Originally posted by Vibe:
Steve
I looked for the 4.6x33 H&K. Is the 4.6x33 H&K really 0.177? Same as air rifles or is it a 0.172 17 caliber?
Original H&K design called for a .177" bullet.

If you use the conversion factor of 0.0393683274021352313167259786476868, you will see that it works out to be 4.496mm.

This was really a developmental round and never reached any production.
03 May 2003, 13:51
pjh421
Steve,

I really enjoy your site. Thank you for all the effort!

Paul