The Accurate Reloading Forums
Powder suitability

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/318100715

28 July 2006, 17:45
Titan
Powder suitability
Are any of these powders suitable for safe loads in .222 Remington?

H4227
H110
Lil'gun

If they are - what bullet weight and charges could be used?

Thank you..

...Titan
28 July 2006, 18:01
vapodog
IMO they're all too fast for the 222.

H-4227 will work but far from providing good velocities.

check here


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
28 July 2006, 18:13
Titan
vapodog

Thanks..

...Titan
28 July 2006, 19:19
fredj338
Only for lower vel. or reduced loads.
http://www.hodgdon.com/data/rifle/222rem.php


LIFE IS NOT A SPECTATOR'S SPORT!
28 July 2006, 21:34
Stonecreek
Any can be used successfully for somewhat reduced loads in .222, however I do not have any data guidelines available. I have used 4227 for a slightly reduced load in a .223, where it works well.
29 July 2006, 19:53
ricciardelli
I wouldn't use them...


http://stevespages.com
29 July 2006, 19:59
Titan
Thank you all....

...Titan