The Accurate Reloading Forums
416 Rigby North Fork

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/3091014591

26 December 2013, 00:06
Lhook7
416 Rigby North Fork
Does anyone have a good load for 370gr softs in a 416 Rigby? Please include the COAL.


____________________________________________

"Build a man a fire, and he'll be warm for a day. Set a man on fire, and he'll be warm for the rest of his life." Terry Pratchett.
26 December 2013, 04:43
Austin Hunter
Send NF a note, they usually have some recommended loads they can send you.


"Evil is powerless if the good are unafraid" -- Ronald Reagan

"Ignorance of The People gives strength to totalitarians."

Want to make just about anything work better? Keep the government as far away from it as possible, then step back and behold the wonderment and goodness.
26 December 2013, 05:49
phurley5
My loads are 100 grains of RL-22 and Fed 215M primer, and 104 grains of H-4831 SSC and the same primer. Have shot both many times, accuracy about same, speeds close also. Good shooting.


phurley
26 December 2013, 22:15
Lhook7
Thank you for the responses.


____________________________________________

"Build a man a fire, and he'll be warm for a day. Set a man on fire, and he'll be warm for the rest of his life." Terry Pratchett.
28 December 2013, 15:12
Nakihunter
While I have not tried Northfork bullets, I use 350 gr TSX with 102 grs of H4350 (AR 2209) & I get 2850 fps. This is safe in my rifle & no case lengthening or trimming required after 3 reloads.

I have now dropped the charge to 100 grs & expect around 2750 FPS.

Phurley's loads should be close to the original for 350 grs - around 2650 fps.

What is the rifle you have?


"When the wind stops....start rowing. When the wind starts, get the sail up quick."