The Accurate Reloading Forums
wilson dies

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/299104186

02 June 2007, 22:16
john durham
wilson dies
need a neck sizing base for rem. 6mm and also need bushings for .271 .272 loaded round . i think that .268 .269 should work if anyone thinks differnt please advise .
thanks
02 June 2007, 23:20
ireload2
If you use Winchester brass you will find it is thinner. I use .268 for Remington brass and .266 for Winchester brass.

If you have a 7X57 and .257 Roberts get bushings for them too.

Be aware that brass fired in large chambers in factory rifles sometimes do not work in Wilson seaters or sizers.
Translation: Do not blame Wilson if your fat brass does not work. It is your oversize chamber that is at fault.