08 August 2011, 05:38
theback4035 rem and H322
Does anyone load H322 in their 35 rems? What load and vel are you getting with a 200 grn bullet?
08 August 2011, 07:04
hivelosityI got about 1850 to 1900f/s Did not care for the loads much. I use imr3031 and get around 2100f/s with 200gr sierras out of a 760 remington. very accurate at 100yrs.
08 August 2011, 16:22
hawkinsDittp on the 3031. A slightly compressed load (39-40 GR.)
will give around 2250 fps. I shoot it in a 760.
08 August 2011, 21:29
theback40it looks like 3031 is only 1-2 powders slower then H322 on the chart, so I'll have to try it too. I've found refrence to 40 grns of H322/200grn in several books for contender loads. I worked up to 40 in a marlin with no stickiness of the lever, but the primers starting to flatten. 39 grns gave over 2200 fps with a 200 grn in both a marlin and a carcano I barreled for a lark to 35 rem. The carcano seats a spitzer well out, but vel was similar. I'll try 3031, not looking for more vel, just a good accurate load.
09 August 2011, 09:18
delloroyou didn't ask, but 37.0 gr of 335, RP brass, WLR primers and 200 gr rem CL gets me ~2 moa in a marlin 336, 2100 fps.
I tried Re-7, 3031, and 4895, none worked as well for me.
09 August 2011, 15:18
hawkinsI forgot to mention that factory ammo runs
around 1900 fps.
09 August 2011, 17:16
theback40quote:
I forgot to mention that factory ammo runs
around 1900 fps.
I checked a box of win silvertips, they only ran 1780 fps.
