The Accurate Reloading Forums
RL25 in 7mm Mag

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/23010385

02 May 2002, 10:57
todbartell
RL25 in 7mm Mag
I'm looking to make a moose/bear load for my 7mm Remington Magnum. I will try 175 gr. Nolser Partitions, and RL25.

Any recipes or suggestions are welcome.

02 May 2002, 13:03
ricciardelli
RL-25 From 53.2 grains to 68.4 grains with CCI-200 Primer...

But I think you will be better off with RL-22.

------------------
http://stevespages.com/page8.htm

03 May 2002, 01:35
POP
With the 162 Hornady I worked up to 70 gr with a 215 BR cap. I got 2960 or so and still no visible excess pressure. With H1000 I worked up to 72.5 and got 3030 fps and 2.25" groups at 300 yds.

------------------
"Hope for the best.....Expect the worst!"