The Accurate Reloading Forums
I need a Pilot

This topic can be found at:
http://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/2301028562

08 May 2021, 03:13
richj
I need a Pilot
well maybe I need a pilot. Are pilots available for this. Pacific trimmer


08 May 2021, 04:05
dpcd
If I ever get my lathe running again I will make you all you want.
08 May 2021, 07:07
youngoutdoors
Give us some measurements and we'll see if any others are compatable.

God Bless, Louis
08 May 2021, 08:07
J Wisner
Yes the diameter of the small section needs to be known.

I have lots of extra RCBS, and Forester pilots on hand, will measure them in the morning and post their diameter

Drop me a PM.

J Wisner
08 May 2021, 16:04
p dog shooter
I have made several over the years.

I used my lathe.

But one can ever use a drill press and file if one has the time.
08 May 2021, 19:00
J Wisner
The RCBS pilots I have are a 5/32" ( .155" ) diameter stub.
While the Forester pilots I have are a 3/16" ( .186" ) diameter stub

JW
08 May 2021, 19:32
Saeed
If you only need one, you can make it yourself on a drill, file and sand paper.

That is how we made things we needed before we got a lathe.


www.accuratereloading.com
Instagram : ganyana2000
09 May 2021, 04:30
richj
Breaking out the caliper. They measure .190 diameter.

Close enough to Foster (should have thought of this--which i have)