15 November 2008, 19:53
7mm. guystuck primer
The othe othere day I was priming some cases with my press and the primer got flicked side ways so now the caswe is stuck in the shell holder, held by the live primer. I am able to reach the primer with a pen, but hesitate to do so with a live primer. Any suggestions would be greatly appreciateed.
How did i manage this you say? Well a great man once said nothing is fool proof to a sufficeintely talented fool.
7mm. guy
15 November 2008, 19:58
Cossack2Deactivate it by putting oil on it, letting soak overnight.
15 November 2008, 20:34
R D McMillanDo NOT rely on oil to deactivate a primer!! That is a MYTH and a very dangerous one at that! Oil will NOT reliably deactivate modern primers because primers are now made with a protective sealent added. Remove the die from the press and replace it with your decapping die. Wrap the press in a pair of old blue jeans or similar material and VERY slowly and GENTLY use the press to force the stuck primer out. Stay as far back from the press as possible, use heavey gloves and wear saftey glasses.
15 November 2008, 20:42
MyNameIsEarlquote:
Originally posted by R D McMillan:
Do NOT rely on oil to deactivate a primer!! That is a MYTH and a very dangerous one at that! Oil will NOT reliably deactivate modern primers because primers are now made with a protective sealent added. Remove the die from the press and replace it with your decapping die. Wrap the press in a pair of old blue jeans or similar material and VERY slowly and GENTLY use the press to force the stuck primer out. Stay as far back from the press as possible, use heavey gloves and wear saftey glasses.
15 November 2008, 21:43
fredj338I've punched out 100s of messed up primers over the last 30yrs. Go slow, completely safe.
15 November 2008, 22:33
p dog shooterI agree with fredj338 I too have punched 1oo's of messed up primers out. Go slow.
15 November 2008, 23:01
ramrod340quote:
I agree with fredj338 I too have punched 1oo's of messed up primers out. Go slow.
+1 I've never had an issue removing live primers. I've had several that got stuck in sideways. Just went slow and wore my normal reloading eye protection. I've never had one go off. Only time was when one got dropped on the floor and the wife sucked it up with the vacuum beater bar set it off. Heard about that one.
16 November 2008, 01:30
7mm. guyBefore I could come back and check the advice on this page I put the case back in and ran it through the primer. Before I had a chacne to even get nervous the case fell out. No boom. Thanks.
7mm. guy
16 November 2008, 19:53
stillbeemanUhhh, its just a primer. I don't mean you can be too cavalier with it but anyone that has used a Lee Loader knows that a popped primer is more excitmet than danger. I mean since there ate no other primers nor powder around.