12 October 2001, 10:58
hvyw8tanyone have some 257 weatherby loads?
having a 257 weatherby built on a 700 action , shillen match barrel 27 inches long , with a #5 contour. any way looking for any load info that you have. thanks mark
13 October 2001, 03:48
<Sniper>I need the same thing. Mine is built on a Win 70 classic action with a 26" Pac-Nor Super Grade, #4 Contour,,recessed crown.
I need a starting load for a Barnes 100 grain XLC boat tail. I had printed it off once before and lost my piece of paper dadgummit.
I remember IMR 7828 but not the starting charge.
16 October 2001, 03:32
<Paul S>I have had very good luck with the 117 Sierra SBT behind 72 grains of RL-25. Velocity is in the neighborhood of 3350fps in a Weatherby Accumark, depending on ambient temperature. Accuracy is 2.5" for three shot groups at 400 yards when I do my part. Have cases that have been fired 7 times and primer pockets are still tight. I have tried 115 Ballistic Tips and 115 Partitions but the Sierras have proven the most accurate.7828 and RL-22 powdwers work pretty well but RL-25 performs best in my rifle. Hope this helps guys. The 257 is one sweet cartridge.
16 October 2001, 04:26
<phurley>I load a 110 gr. Berger Moly bullet and a 115 gr. Nosler Ballistictip with 77 gr. H-1000 and get cloverleafs at 100 yards, when I have a good day behind the trigger. My hunting bullet is a 115gr. or 120 gr. Nosler Partition. I use 70 gr. RL-22 and get an ave. fps. of 3500, not one holers but close. Good shooting.
------------------
16 October 2001, 07:15
Rich Anderson70gr of R22 in front of 115gr Ballistic Tip or 67 gr of IMR 7828 and Sierria 117gr work real well from Weatherby's Ultra Light with 26" bbl.